|
|
|
|
Component Parts and Materials
1 Aisi 316L Steel Body
2 Aisi 316L Steel Collet
3 Aisi 316L Steel Capsule
4 Aisi 316L Steel Clamping washer
5 PTFE Safety ring
6 Food FKM Lip seal
7 Food FKM Thread packing
|
|
Connection tubes
Tube in general.
PA6, PA11, PA 12, Polyethylene, *Polyurethane, PTFE.
*For Polyurethane hoses it is required a minimum hardness of 98 shore
|
Temperatures
Minimum temperature:-15 °C
Maximum temperature: +225 °C |
Threads
Tapered gas in conformity with ISO 7.1, BS 21, DIN 2999.
Parallel gas in conformity with ISO 228 Class A.
Metric in conformity with ISO R/262. |
Pressures
Minimum pressure:
-0.99 bar (-0.099 Mpa)
Maximum pressure:
15 bar (1.5 Mpa) |
Fluids
Compressed air.
Vacuum
Fluid for food and chemical industry compatible with fitting components. |
Fittings are available in the following sizes:
tube from 4 up to 12;
thread of M5 to 1/2.
|
The collet made in stainless steel Aisi 316L ensure the perfect tube clamping with every kinds of materials without damaging the surface.
The connection between the tube and the fitting ensure a total tightness even in severe conditions such as impact and vibrations.
All of threads from this range, have been equipped with tightening parts which allow the direct assembly of the fittings, reducing the installation time.
Food FPM O-Ring for the parallel threads.
All the straight fittings, with taper and parallel threads can be assembled also with Allen wrench and it is possible to use them in reduced spaces.
|
