Aignep Raccorderie

Site map-Contacts

Datasheets FRL

FRL Series

FRL Series: Art. T015 - Coalescer Filter

Come back

Catalogue

Beyond standard items on our catalogue, you can ask for special items as shown in the chart below.

Component Parts and Materials
1 Technopolymeric Body
2 Technopolymeric Bowl
3 Transparent technopolymeric Glass
4 Technopolymeric Condensate exhaust
5 Coalescer cartridge
6 Fixing with distance
7 Zama End part
8 NBR O-Ring

Threaded fastening FRL1= 1/4" - 3/8" FRL2= 3/8" - 1/2" FRL3= 3/4" - 1"	6 bar Flow rate with Δp 1 bar FRL1= 700 Nl/min FRL2= 725 Nl/min FRL3= 920 Nl/min	Wall clamping screws FRL1= M4x14 FRL2= M5x18 FRL3= M6x20
Bowl Capacity FRL1= 22 cm³ FRL2= 46 cm³ FRL3= 89.5 cm³	Filtration Grade 0,01 µm	Fluid 5µm Filtred Compressed air
Maximum Pressure 15 bar	Temperature Min -10°C / Max +50°C to 10 bar	Assembling position Vertical
Condensate Exhaust Semi Automatic - Manual;

Coalescing cartridge is made of microfiber layer with external stainless steel structure. Coalescing cartridge uses inertial impact, interception and coalescense to gather liquid particles into drops. These drops will fall into bowl bottom.
Coalescing Filter is used as Oil Separator which removes oil-vapours from air output. We recommend to install a 5 μm Filter upstream to protect coalescing filter from choking of cartridge.

Credits