|
|
|
|
Component Parts and Materials
1 Nickel-plated brass Body
2 Acetalic resin Collet
3 Nickel-plated brass Capsule
4 Steel aisi 301 Clamping washer
5 Tecnopolymeric Safety ring
6 NBR 70 Lip seal
7 NBR 70 Thread packing
|
|
Connection Tubes
Plastic tubes: PA6, PA11, PA12, Polyethylene, *Polyurethane; ecc.
*For Polyurethane hoses it is required a minimum hardness of 98 shore.
|
Temperatures
Minimum Temperature:-20 °C
Maximum Temperaure:+80 °C
|
Threads
"Short" Tapered thread
Taperedmgas in conformity with ISO7.1, BS21, DIN 2999.
Parallel gas in conformity with ISO 228 Class A.
Metric in conformity with ISO R/262
|
|
Pressures Rating
Minimum pressure:
-0.99 bar (0.099 Mpa)
Maximum pressure:
15 bar (1.5 Mpa) |
Fluids
Compressed air.
Vacuum.
|
Fittings are available in the following sizes:
tube from 3 up to 14;
thread of M5 to 1/2.
|
The collet made in stainless steel ensure the perfect tube clamping with every kinds of materials without damage the surface.
The connection between the tube and the fitting ensure a total tightness even in severe conditions such as impact and vibrations.
The particular geometric shape of the seal ensure the perfect tightness even with vacuum.
All of threads from this range, have been equipped with tightening parts which allow the direct assembly of the fittings, reducing the installation time.
All the straight fittings, with taper and parallel threads can be assembled also with Allen wrench and it is possible to use them in reduced spaces.
The unique thread used on the Series “50000N” fitting allows assembly to a variety of different thread standards.
Other advantages:
• Reduced overall length
• Smaller hex on some fitting sizes
• Fitting will seal on surfaces without spot-facing
Series “50000N” fittings can be assembled with female threads produced to the following Standards:
• taper NPT and NPTF.
• parrallel ISO 7 - BSPP.
• taper ISO 7 - BSPT - PT,
• parallel ISO 228 - BSP - PF.
“50000N” Series Swift-Fit fittings will seal on concave and convex surface without spot-facing with different types of chanfers and radius.
Click to enlarge.
55800N Seats Dimensions Push-fit Cartridges
Click to enlarge
| Tube |
D1 |
D2 |
D3 |
D4 |
H1 |
H2 |
H3 |
R |
| 3 |
3.4 |
6.05 |
6.4 |
6.95 |
3.7 |
6.1 |
8.6 |
0.5 |
| 4 |
4.2 |
7.45 |
8.4 |
9 |
3.75 |
6.5 |
9.5 |
0.5 |
| 5 |
5.2 |
8.35 |
9.4 |
10.15 |
4.45 |
7.9 |
10.5 |
0.5 |
| 6 |
6.2 |
9.35 |
10.45 |
11.35 |
5 |
8.5 |
11.5 |
0.5 |
| 8 |
8.2 |
11.4 |
12.4 |
12.9 |
5.2 |
8.5 |
12.5 |
0.75 |
| 10 |
10.2 |
14.5 |
15.4 |
16 |
6.7 |
10.5 |
15 |
0.75 |
| 12 |
12.2 |
17 |
18 |
19 |
7.5 |
12.1 |
17 |
1 |
|
