|
|
|
|
Component Parts and Materials
1 Nickel-plated brass Body
2 Acetalic resin Collet
3 Nickel-plated brass Capsule
4 Steel Aisi 301 Clamping washer
5 Tecnopolymeric Safety ring
6 NBR 70 Lip Seal
7 NBR 70 Thread packing
|
|
Connection Tubes
Plastic tubes: PA6, PA11, PA12, Polyethylene, *Polyurethane, ecc.
*For Polyurethane hoses it is required a minimum hardness of 98 shore
|
Temperatures
Minimum Temperature:
-20 °C
Maximum temperature:
+80 °C |
Threads
"Short" Tapered thread.
Tapered gas in conformity with ISO 7.1, BS 21, DIN 2999.
Parallel gas in conformity with ISO 228 Class A.
Metric in conformity with ISO R/262.
|
Pressures
Minimum pressure:
-0.99 bar (0.099 Mpa)
Maximum pressure:
15 bar (1.5 Mpa) |
Fluids
Compressed air.
Vacuum |
Fittings are available in the following sizes:
tube from 3 up to 14;
thread of M5 up to 1/2.
|
|
|
The collet made in stainless steel ensure the perfect tube clamping with every kinds of materials without damage the surface.
The connection between the tube and the fitting ensure a total tightness even in severe conditions such as impact and vibrations.
The particular geometric shape of the seal ensure the perfect tightness even with vacuum. |
| All of threads from this range (also the M5), have been equipped with tightening parts which allow the direct assembly of the fittings, reducing the installation time. |
|
|
|
All the straight fittings, with taper and parallel threads can be assembled also with allen wrench and it is possible to use them in reduced spaces. |
55800 Seats Dimensions Push-Fit Cartridges
Click to enlarg.
| Tubo |
D1 |
D2 |
D3 |
D4 |
H1 |
H2 |
H3 |
R |
| 3 |
3.4 |
6.05 |
6.4 |
6.95 |
3.7 |
6.1 |
8.6 |
0.5 |
| 4 |
4.2 |
7.45 |
8.4 |
9 |
3.75 |
6.5 |
9.5 |
0.5 |
| 5 |
5.2 |
8.35 |
9.4 |
10.15 |
4.45 |
7.9 |
10.5 |
0.5 |
| 6 |
6.2 |
9.35 |
10.45 |
11.35 |
5 |
8.5 |
11.5 |
0.5 |
| 8 |
8.2 |
11.4 |
12.4 |
12.9 |
5.2 |
8.5 |
12.5 |
0.75 |
| 10 |
10.2 |
14.5 |
15.4 |
16 |
6.7 |
10.5 |
15 |
0.75 |
| 12 |
12.2 |
17 |
18 |
19 |
7.5 |
12.1 |
17 |
1 |
Click to enlarge.
|
